Upload and View 3D Models in the File Module
Overview: upload and view 3D models
The Files module supports online viewing of 3D models such as IFC and Revit, with navigation tools and optional task links to model areas, which is used for BIM coordination inside the project.
For combining multiple models, see the combine 3D models guide. Revit viewing requires project activation and may need additional licensing.
- Your role can view IFC models with normal Files access. Revit viewing requires module activation.
- You can find the menu at Files module - upload model - open file in the 3D viewer.
- This prepares models for online viewing and can support task linking and multi-model coordination.
Requirements for 3D models
Requirement | Description |
|---|---|
Supported formats | .ifc, .rvt, .dwg, .dwf, .dxf, .nwd |
Conversion time | About 10 seconds to 20 minutes depending on file size |
Revit viewer | Requires Revit module activation and may need an additional license |
Combine models | Models must be in a supported converted format |
How to upload and view a 3D model
- Go to the Files module in the sidebar.
- Upload your 3D model file, for example
.ifc,.rvt,.dwg,.dwf,.dxf, or.nwd. - Wait for the model to be prepared. Conversion can take from about 10 seconds to 20 minutes.
- If Revit viewing is enabled, wait for the ready email when applicable.
- Locate the model in the folder structure.
- Click the file to open it in the 3D viewer.
Results: 3D model viewing
Feature | Description |
|---|---|
Revit model viewer | Requires Revit module activation and additional license |
Model conversion time | About 10 seconds to 20 minutes depending on model size |
Task linking and annotation | Supported via Autodesk viewer integration |
Combine multiple models | Models can be loaded together for coordination |
- Uploaded models are prepared automatically for online use
- The viewer supports navigation and element isolation
- Multiple models can be viewed together
Troubleshooting: upload and view 3D models
Problem | Cause | Solution |
|---|---|---|
Model not viewable yet | File is still converting | Wait for conversion to finish, then open the file again |
Revit model viewer not available | Revit module is not activated | Ask support to enable the Revit module, and include your company and project names |
File failed to convert | Format issue, corrupt model, or model too large | Re-export a supported format if possible, then contact support with the filename, format, and approximate size |
Cannot combine models | One or more models are incompatible or not converted | Confirm each model is a supported converted format, then combine again |
Updated on: 08/04/2026
Thank you!